Instinct Pro version 2.1.0

What’s new

Graphs

  • Graph options have been added for Data 5, Data 7 – 10 (or 7 – 12 on Instinct Crossover)

  • Possible data / graph duration:

    HR – 1 hour
    Body Battery – 3 hours
    Stress – 3 hours
    SpO2 – 2.5 days
    Elevation – 2 hours
    Barometric pressure – 2 hours
    Temperature – 2 hours

    The actual choice depends on the device capabilities.

  • The graph duration may be dependent on the device. If you find that it is different on your watch please send feedback to vgfsyhcxft@gmail.com.

  • There are three presentation options for the graphs (line, area or colors).

    Colors is only available on devices with color display.

  • Color mapping depends on the type of the graph:

    HR: according to the sport for which the current activity retrieves heart rate zone thresholds, or ‘generic’ if there is no activity (zone 1 – gray, zone 2 – blue, zone 3 – green, zone 4 – yellow, zone 5 – red)

    Body battery: <= 25 – red, <= 50 – yellow, <= 75 – green, <= 100 – blue

    Stress: <= 25 – blue, <= 50 – green, <= 75 – yellow, <= 100 – red

    SpO2: <= 92.5 – red, <= 95.0 – yellow, <= 97.5 – green, <= 100.0 blue

    Elevation, Pressure, Temperature: lowest 25% – blue, lower medium 25% – green, upper medium 25% – yellow, highest 25% – red

  • On devices with AMOLED or LCD display, the graph always defaults to line style in AOD mode because of battery drain and burn-in protection considerations.

9 thoughts on “Instinct Pro version 2.1.0”

  1. Hi. Thank you for your feedback. According to preliminary results of my investigation, Garmin has changed the way they report total calories in firmware 11.18 on Instinct devices (if your device is something else, please let me know), so the current formula for calculating active calories in my app no longer works. I don’t know yet if this is a deliberate change or a bug on Garmin’s side. It may take some time before I gather more information to be able to decide what to do about it.

  2. Hi. Active calories on the display are not matching the figures in gamin connect. The difference is more than 150 cal. Please align them. Tony

  3. Hello and thanks for your comment.

    It depends. It might be possible on devices that have enough memory, but I don’t think it is possible on Instinct 2.

    I have not made a decision yet to start adding new features to non-Instinct devices only.

  4. Ok, dzięki za info z tym OWM. Już nie będę kombinować chyba z tym 😁

  5. Dzięki, ale nie mam pewności czy dobrze zrozumiałem pytanie. OWM zamiast Garminowej pogody wybiera się w polu ‘Weather source’. Dodatkowo potrzebny jest ‘OWM API key’. Z tym kijem to jest sprawa trochę skomplikowana przez zmiany które OWM wprowadzało w ostatnich miesiącach, próbowałem to wyjaśnić w podręczniku użytkownika.

  6. Świetna tarcza, a jak ustawić OWM API na inne zamiast Garminowej pogody?

  7. Dzięki za komentarz! Jest możliwość wyświetlania wschodu i zachodu (Next sun event + 2nd next sun event). Date format D.M.y będzie w taki sposób datę pokazywał. Migający dwukropek wydaje mi się że nie ma sensu bez wyświetlania sekund. A z wyświetlaniem sekund równocześnie, to miałoby spory wpływ na zużycie baterii, a nawet nie wiem czy technicznie to jest możliwe z powodu ograniczeń nałożonych przez Garmina. Ostatniego nie rozumiem – czy można to bardziej szczegółowo wyjaśnić?

  8. Instinct 2 solar Wschód słońca jest , brak zachodu aby jednocześnie się wyświetlało.
    Brak migających : między godzina a minutami. Data cyfrowo łącznie z miesiącami DD.MM.YY.
    W kółko % z ucina baterii.

Please share your comments or ideas for improvement and new features.

PHP Code Snippets Powered By : XYZScripts.com
%d bloggers like this: