4 configurable datasets for quick changes of displayed data
How this works:
A new ‘Dataset’ setting option was added for quick changing of the displayed data configuration. It allows to choose sets Opt1 to Opt4. Each set keeps the configuration for the main data fields, left and/or right data fields (depending on the device), and the circle.
You will start with Dataset Opt1 which keeps your existing data setup. When you choose a dataset that was not used before, it will begin with the default settings. Then you can can select the data that you want in this set and save the settings.
The next time you switch to this set from another, your configuration will be restored.
Switching between datasets can be done quickly on the watch, without the need to reach for the phone
NOTE: This is only possible on watches running CIQ 2.3.0 or higher.
How this works:
When you go to the watch face selection menu on your device, besides the ‘Apply’ option, you will see ‘Customize’ if your device supports it. When you select it, you will be able to cycle between the 4 data sets by pressing the select key or tapping on the ‘Dataset’ option. Once done, press the exit key.
Switching color themes on the watch
How this works:
Press the select key or tap the ‘Theme’ option. Then press the exit key.
Escape character in date format
How this works:
If you enter ‘=’ (equals sign) in the ‘Date format’ field, the following character will be taken literally, i.e. not substituted by its assigned data.
So for example ‘=n’ will show an n instead of the day name.
If you input ‘Garmin’ in the ‘Date format’, you will get something like Gar1iFri or Gpr1iFri (depending on the time of the day), but if you input ‘G=ar=mi=n’, you will always get Garmin.
Military Date Time Group (DTG) option for some data fields
Removed units in distances to save screen space
Changed wind speed ‘kn’ (ISO recommendation) to ‘kt’ (used in aviation)
Graph options have been added for Data 5, Data 7 – 10 (or 7 – 12 on Instinct Crossover)
Possible data / graph duration:
HR – 1 hour Body Battery – 3 hours Stress – 3 hours SpO2 – 2.5 days Elevation – 2 hours Barometric pressure – 2 hours Temperature – 2 hours
The actual choice depends on the device capabilities.
The graph duration may be dependent on the device. If you find that it is different on your watch please send feedback to firstname.lastname@example.org.
There are three presentation options for the graphs (line, area or colors).
Colors is only available on devices with color display.
Color mapping depends on the type of the graph:
HR: according to the sport for which the current activity retrieves heart rate zone thresholds, or ‘generic’ if there is no activity (zone 1 – gray, zone 2 – blue, zone 3 – green, zone 4 – yellow, zone 5 – red)
Body battery: <= 25 – red, <= 50 – yellow, <= 75 – green, <= 100 – blue
Shows body weight according to Garmin User Profile.
When selected for one of the rails it shows daylight, golden and blue hours (and a mark for sunrise/sunset) in a 2 hour window.
If the ‘Sun bar + times’ option is selected, it will override the data fields above or below the rail with golden/blue/twilight hours.
To conserve space, now it shows only the part that is significant in comparison with the remaining countdown time. So it will show only the number of remaining days if it is larger than zero, otherwise it will show hours:minutes.
NOTE: This post describes combined new features of releases 2.18.0 and 2.17.0, since they were made in quick succession.
6 new data points (stress, body battery, respiration rate, time to recovery, VO2Max (running + cycling)*
Battery in days added if battery info is displayed in data fields Opt 1 – Opt 4*
Location fallback to Garmin weather if not available from activity**
Oversize HR and seconds / Oversize data options now also available on AMOLED/LCD devices
2 more custom colors
2 additional data fields (Opt 5 between Opt 1 and Opt 2 and Opt 6 between Opt 3 and Opt 4)
Top icons text hidden when the icon color is the same as the background color
‘Feels like’ can be selected for all data fields
‘Chance of rain’ renamed to ‘Precipitation’. If it is selected for Opt 1 – Opt 4, precipitation volume [mm] will be appended if available
More data options for ‘Right data’ and ‘When seconds off, show’ fields
(*) The highly anticipated new data is only available on some devices and may require firmware update from Garmin before it starts working. So it may happen that it will not be displayed on your watch yet (you will see “–” instead).
To check if your device is compatible, go to the watch menu System / About / SW versions and look for “Connect IQ System 5” or “API level” higher than 3.3.0.
It has been tested OK on Garmin’s simulator and on a real Venu, so hopefully it should be working on your watch too, as soon as the update to System 5 arrives.
Connect IQ System 5 has rolled out on a number of devices with more coming:
Public Beta Available
Forerunner® 245 Series Forerunner® 745 Forerunner® 945 Forerunner® 945 LTE Venu® Series Venu® 2 Series Venu® 2 Plus Series Vivoactive 4 Series
It shows after battery % in data fields 5 – 8 (see picture)
It will only work on devices supporting System 5
NOTE: Apparently currently many devices with System 5 on it are not able to display this data. If you don’t see it showing on your watch even though you have System 5, please wait for a firmware update from Garmin.
This update brings more flexibility in the data configuration which allows simultaneous display of more information:
The top and bottom data fields now include the option to show the Active bar.
A configurable date option was added for the data fields 3-10.
The date field is fully configurable using Garmin app and can display all the data that were previously possible in the fields 13-16, in any order, plus additional characters to separate the data (e.g. space, /, -, . , etc.).
To configure the date, you need to enter any of the following letters in the ‘Date format’ setting:
d = day number without leading zero D = day number with leading zero m = month number without leading zero M = month number with leading zero y = 2-digit year Y = 4-digit year n = day name (according to system language) N = month name (according to system language) w = ISO week number without leading zero W = ISO week number with leading zero a = AM/PM
Any other character (e.g. – / : . ) will be displayed if it is available on the watch.
For example, you can use the following formats:
“n N d” → Fri Aug 24 “n D.M” → Fri 24.08 “d/m [W]” → 24/8  “Y\M\D” → 2018\08\24 “m-d-y” → 8-24-18 “n D (w)” → Fri 28 (34)
The highlight/line for the date field shows progress towards the end of the week, according to the ‘first day of the week’ set in Garmin Connect User Settings.
To make space for a long date you can set the opposite data field to “Off”.
This way of showing the date frees up the data fields 13-16 for other information. The available options (depending on the device) include:
– Notifications counter – Active alarm counter – Calories – Active calories – Floors – Active minutes (day) – Active minutes (week) – Wrist HR (updated once a minute) – Wrist HR (updated once a minute or every second on gesture) – SpO2 – Internal sensor temperature – Humidity – Chance of precipitation – Battery % – Solar charging %
Beaufort wind speed unit has been added.
On round watches, if one of the top or bottom data fields is set to “Off”, the icon of the opposite field is shown in the middle, not on the side as before.
Total or Active calories can be selected for the gauges.
A new option “Calories goal” has been added in the settings to allow declaration of daily total calories goal.
The goal for active calories is calculated automatically according to your Basal Metabolic Rate estimated from the Garmin User Profile data (age, gender, weight).
Two new hand shapes
New analog seconds shape
Texture option for the background
There are currently two texture options. Option 1 may work better with circular patterns and Option 2 with rectangular or diagonal patterns.
Texture color is adjustable.
1) These features are only available on the newer devices, and not on the legacy ones (before Connect IQ 3.x)
2) If the option “Anti-alias (if available) / sec hand on gesture only” is present in the settings, it needs to be enabled for the texture to show. Otherwise the texture will not be visible, even if it is selected in the “Texture” field.